BENDIX SD-61-4933 Manuel D’Utilisation

Page de 20
4
22"
(558.8mm)
18"
(457.2mm)
48"
(1219.2mm)
14"
(355.6mm)
•  an audible warning:  When the vehicle’s turn signal 
is active and the sensor detects a large metallic object 
alongside the vehicle, the side sensor display emits 
an audible warning tone.
•  Volume Control:  Steps the volume level of the alerts 
between low, medium and high (and back through the 
sequence).  The most recent selection is stored in the 
memory.
•  an ambient light Detector:  Automatically adjusts 
the brightness of the LEDs.
If the system detects a failure and becomes inoperative, the 
display unit will warn the driver by continuously illuminating 
both the red and yellow LEDs at the same time.
1.0 OPERaTION
OPERaTOR DISPlay UNIT  
See Figure 3
.
The Bendix
 BlindSpotter
®
 Radar system assists the driver 
by giving audible and visual alerts.
•  a visual warning:  The side object display unit uses 
two (2) LED indicators to display the status of the side 
radar sensor.  The yellow LED indicates the system 
is active, but no objects are detected.  The red LED 
indicates the system is detecting an object.
LED
Indication
Red Indicator
Object Detected
Yellow Indicator
No Object Detected
Red and Yellow (at power-up) Self-Test
Red and Yellow (constant)
Sensor Diagnostic 
Trouble Code (DTC)
Volume Control Button
Red LED: Alert
Ambient Light Sensor
(Automatically Dims LEDs)
Yellow LED: Standby; 
No Object Detected
FIGURE 3 - Bendix
 
BlindSpotter driver diSplay Unit 
led indicatorS
Operation Section Index
1.0 Operation . . . . . . . . . . . . . . . . . . . . . 4
1.1 Range . . . . . . . . . . . . . . . . . . . . . . . 5
1.2  Sensor Location .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  5
1.3  Sensor Orientation.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   5
1.4  Operator Display Unit Mounting .   .   .   .   .   .   .   .   .   .   4
1.5  What To Expect When Using The 
 
Bendix BlindSpotter System.   .   .   .   .   .   .   .   .   .   .   .   6
1.6  Alerts And Warnings .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   7
1.7  Bendix BlindSpotter System Diagnostic
 
Trouble Codes .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   7
1.8  Radar Sensor Replacement .   .   .   .   .   .   .   .   .   .   .   .   6
1.9  Alert Volume .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   6
1.10  Potential False Alerts . . . . . . . . . . . . . . . 6
1.11  Radar Clearance  . . . . . . . . . . . . . . . . . 6
FIGURE 4 - recommended 
inStallation location 
(Single SenSor SyStemS)