Monogram ZWE23ESHSS Manuel De Montage

A cold water supply is required for automatic ice maker 
operation. If there is not a cold water supply, you will need 
to provide one. See Installing the Water Line section.
NOTES:
•  Before making the connection to the refrigerator, be sure 

the refrigerator power cord is not plugged into the wall 

outlet.

•  If your refrigerator does not have a water filter, we 

recommend installing one if your water supply has 

sand or particles that could clog the screen of the 

refrigerator’s water valve. Install it in the water line 

near the refrigerator. If using GE SmartConnect™ 

Refrigerator Tubing Kit, you will need an additional tube 

(WX08X10002) to connect the filter. Do not cut plastic 

tube to install filter.

•  Before connecting the water line to the house, purge the 

house line for at least 2 minutes.

A. If you are using copper tubing, place a compression nut 

and ferrule (sleeve) onto the end of the tubing coming 

from the house cold water supply.

  If you are using the GE SmartConnect™ tubing, the nuts 

are already assembled to the tubing.

B. If you are using copper tubing, insert the end of the 

tubing into the refrigerator connection, at the back of the 

refrigerator, as far as possible. While holding the tubing, 

tighten the fitting.

  If you are using GE SmartConnect™ tubing, insert 

the molded end of the tubing into the refrigerator 

connection, at the back of the refrigerator, and tighten 

the compression nut until it is hand tight. Then tighten 

one additional turn with a wrench. Over tightening may 

cause leaks.

C. Fasten the tubing into the clamp provided to hold it in 

position. You may need to pry open the clamp.

D. Turn on the water at the shut-off valve to check  

for leaks.

1/4“  Tubing

Tuyau de 1/4 po
Tubería de 1/4

“

Tubing Clamp

Bride

Abrazadera del tubo

1/4” Compression Nut

Ferrule  

(sleeve)

SmartConnect™ 

Tubing

Refrigerator 

Connection

See the grounding information attached to the power 

cord.

The leveling legs have two purposes:
• Leveling legs adjust so the refrigerator is firmly posi-

tioned on the floor and does not wobble.

• 

 

Leveling legs serve as a stabilizing brake  
to hold the refrigerator securely in position during 
operation and cleaning. The leveling legs also prevent 
the refrigerator from tipping.

Turn the leveling legs clockwise to raise the refrigerator, 
counterclockwise to lower it.

NOTICE: 

To avoid possible property 

damage, the leveling legs must be firmly 

touching the floor.

Flat-Head Screwdriver

Raise