Thermador PRG304GH Mode D'Emploi

English 18

Control Knob

•

The griddle is electronically controlled with 
temperatures marked on the knob from 150°F to 500°F.

•

There are no fixed settings on the knob.

•

Press and turn the knob clockwise to the temperature 
setting.

Preparing the Griddle

The griddle must be tilted slightly forward for optimum 
performance. See Installation Manual for procedure to 
check and adjust griddle for proper tilt of griddle plate. 
During installation, the installer is responsible for leveling 
the product. The griddle plate should be washed with warm 
soapy water then rinsed with clear water prior to use.The 
griddle may be used without any butter, margarine or oil. 
However, a very small amount may be used to flavor foods.

Any utensil may be used on the griddle surface. 

Care should be taken that the surface is not gouged when 
utensils are used.

Griddle Grease Tray

•

Push the tray under the front edge of the griddle 
overhang to catch grease or food residue.

•

Clean the tray after every use. When removing the tray, 
use care when tipping it so that the contents do not spill 
(see illustration).

•

After cooling, pour the grease into a grease resistant 
container for disposal. 

Cooking on the Griddle

1. Check that the grease tray is tucked under the griddle 

plate overhang.

2. Turn the knob to the cooking temperature to preheat 

the griddle.

3. Preheat 10 to 12 minutes.
4. Add butter, margarine, oil or shortening if desired.

Griddle / Grill performance may vary if there is an 
excessive amount of airflow in the vicinity of the appliance. 
The excessive airflow could be from an air-conditioning 
register or ceiling fan blowing at the cooktop. This could 
create longer than normal heat-up time or it could cause 
the Griddle / Grill temperature to be higher or lower than 
the knob setting.

Note: 
Having a properly installed ventilation hood is not 
considered a source of excessive airflow.

  Griddle

To remove tray,

slide back and lift