Q-Logic MKII-BASE16 Manuel D’Utilisation
GigWorks MkII-16 Switch Model MKII-BASE16
Installer's/User's Manual 59003-01 Rev. A
Installer's/User's Manual 59003-01 Rev. A
Switch Management
3-23
Switch Utilities — Chassis Configuration
Chassis Configuration
Figure 3-8 Chassis Configuration Tab
Refer to Figure 3-8. The Chassis Configuration tab enables you to assign or
modify the Fabric ID, the Chassis Number, the Stage Type, Fibre Channel
timeouts for the chassis, and the Administrative State of each port on the chassis.
It also allows you to read the Operational State of each port on the chassis.
modify the Fabric ID, the Chassis Number, the Stage Type, Fibre Channel
timeouts for the chassis, and the Administrative State of each port on the chassis.
It also allows you to read the Operational State of each port on the chassis.
Fabric ID
Place the cursor in the Fabric ID box and type a fabric number. It represents bits
20 through 23 of the 24-bit Fibre Channel Address.
20 through 23 of the 24-bit Fibre Channel Address.
Press the Apply button to apply the Fabric ID to the chassis.
Chassis Number
The Chassis Number represents bits 19 through 14 of the 24-bit Fibre Channel
Address.
Address.
The Chassis Number is in the range of 00-63 and identifies a particular chassis within
the Input-Output/Transfer (IO/T) chassis group or a particular chassis within the Cross-
Connect (CC) chassis group in a multi-stage Switch fabric. IO/T and CC chassis are
the Input-Output/Transfer (IO/T) chassis group or a particular chassis within the Cross-
Connect (CC) chassis group in a multi-stage Switch fabric. IO/T and CC chassis are