TANDBERG 4500 Series Manuel D’Utilisation

Configuring the MCU

7

All administration of the MCU is performed via the web interface.
To log in to the web interface of the MCU:
1

 Use your browser to navigate to the IP address of the MCU (to discover the IP 
address, refer to the previous section).

2

Click  the 

 link on the top right of the screen, then click

 

and enter the user name 

 with no password. 

If you have H.323 endpoints, using an H.323 gatekeeper can make it easier for 
participants to call in to a conference. You can configure the MCU to use an external 
gatekeeper or its own built-in gatekeeper. For information about using the built-in 
gatekeeper, refer to the online help.
If you have SIP endpoints, using a SIP registrar can make it easier for participants to 
call in to a conference.
To configure the MCU to use an H.323 gatekeeper:
1

In the web interface of the MCU, go to 

.

2

Enable 

 and configure the settings you require, using 

the online help for further assistance.

3

Click 

.

To configure the MCU to use a SIP registrar:
1

In the web interface, go to 

.

2

Configure the settings you require, using the online help for further assistance.

3

Click 

. 

Codian recommends that you change the admin account to use a 
password as soon as possible. To do that, go to 

, click the 

 

link, and provide the required user information.

Before you configure the MCU to use, and register conferences to, a SIP 
registrar, you must set up the MCU and its conferences on that SIP 
registrar.