Toshiba 8GHO44-88 Manuel D’Utilisation
35
4.7
General
Voice
Warning
– Allows you to use an audible warning (.wav Sound Clip) for when Motion or Sensors are
activated.
Video Loss Alarm Beep
– This option enables the internal audio alarm when Video loss is detected.
Video Loss Alarm Output
– This option activates Alarm Control Output when video loss I detection. The Alarm
Control Output is the last Control Output on the DVR (#16 on a 16ch DVR and #8 on an 8CH DVR)
Video Loss Alarm
Video Loss Alarm
– This option sends video loss information to the log files.
OSD Font Size
– This option allows you to adjust the On Screen Display Font size for cameras.
Display Control Status Bar
– Enables/Disables Control Status Bar on the Main Display Screen. (See section
3.3).
OSD
Bold
– This option makes the OSD Font Bold.
Display Sensor Status BAR
– Enables/Disables the Sensor Status Bar on the Main Display Screen. (See
section 3.3).
Display Motion Detection Area Box
– Displays the Motion area box on the Main Screen whenever motion
occurs.
Intensive
Recording
– The Intensive Recording option increases the FPS recording of a camera that is
experiencing an alarm event.
Beep on Log-in fail
– This option activates an audio alarm when a user enters incorrect login information 3
times.
Auto Sequencing Time (sec)
– When the Loop button is activated, the Auto Sequencing Time specifies the
amount of time that elapses before switching to the next Screen Division group.
Figure 4.7
1
2
3
4
5
6
7
8
9
10
1
2
3
5
4
6
7 8
9
10
11
12
13
14