Toshiba DVR620KC Manuel D’Utilisation

K / L] to enter the date, then 

B].

K / L / { /

{ B] or [the Number

B].

time exceeds 12 hours.

K / L] to select an appropriate 

B].

K / L] to select a recording media

B].

K / L] to select a recording 

Refer to “Recording Mode” on page 34 for DVD or
“Recording” on page 93 for VCR.
•  You can check the remaining recordable space

of the disc when you select the recording
mode.

When “Auto” is selected as a recording mode, the unit 
calculates how much time is available on the disc and
determines the appropriate recording mode to
complete recording the program.

program list.

•  The recording may be cut short, when the available

recording space of the disc is too limited.

After displaying an instructive message for 10
seconds, timer program list will appear.

Your program setting is stored.
•  To set another program, repeat steps 2 to 8.
• To exit, press [TIMER PROG.] or [SETUP].
•  When 2 or more programs are overlapped,

“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 41.

will appear on the front panel display, while this

unit waits to make the recording.

“VCR” will appear

on the front panel display

if VCR

timer recording have been set.

When pressing [

L] at 

the current date, the

date will change as

follows.

e.g.) January 1st

E9PKCCD_DVR620KC_EN_book.indb   40

E9PKCCD_DVR620KC_EN_book.indb   40

2011/09/01   9:29:12

2011/09/01   9:29:12