Sony KDS-70R2000 Manuel D’Utilisation

 GB

Pull out the lamp.
Hold the indented grooves of the lamp as 
shown, and pull the lamp straight out. 
If the lamp is hard to remove, pull the right 
side of the lamp for additional traction 
(KDS-55A2000).

• Do not touch the inside of the lamp compartment.
• The lamp is very hot immediately after use. Never 

touch the glass portion of the lamp or the surrounding 
parts.

• After the used lamp has cooled, place it into the empty 

box of the replacement lamp. Never put the used lamp 
into a plastic bag.

Put the new lamp into its place.
Make sure the lamp is securely mounted 
into the compartment. Failure to do so may 
cause a fire or the screen to go dark.

• The lamp compartment is tilted.
• If the lamp is not securely reattached, the self-

diagnostic function may be triggered and 

1

 flashes in 

red three times (page 15).

Reattach the lamp door.
For KDS-55A2000, replace the door by 
inserting the two tabs in the slot from the 
left side. Slide the lever to the right and 
then turn the screw clockwise to secure the 
door.
For KDS-70R2000, turn the knob to the 
right while pushing the door in, until the 
marks on the lid and the case line up. Then 
turn the screw clockwise to secure the 
door.

Hold this part of the lamp

Hold this part of the lamp