Toshiba IK-WB01A Manuale Utente

About Wireless LAN Connection

There are two methods to establish the wireless LAN connection.

1. Cofiguring the wireless network environment for the camera's wireless LAN

settings.

2. Cofiguring the camera's wireless LAN settings for the wireless network

environment.

The default settings of the network camera are as follows:
 ● Network information

Camera name

: nwcam01

IP address

: 192.168.0.30

Subnet mask

: 255.255.255.0

 ● Wireless LAN settings

Connection mode

: Adhoc method

ESS-ID

: ikwb

Communication channel : Channel 10
WEP

: None

■ Configuring  the  wireless  network  environment  for

camera's wireless LAN settings

Install a wireless LAN board or wireless LAN card into your personal computer.

1) Turn on the power of the camera

●

Ensure that the LAN cable is not inserted. If the LAN cable is inserted before
plugging in the camera, the network camera does not start in wireless LAN
mode.

2) Set the IP address of the personal computer

    ●

 Set the IP address which you are not using other than 192.168.0.30

(camera's IP address).
・Set  the  IP  address  to  192.168.0.50  (and  subnet  mask  to

255.255.255.0) as an example.

・ For details on the procedure, refer to the user's guide of the personal

computer.

3) Change the wireless LAN settings of the personal

computer

    ●

  Set the same settings as "Wireless LAN settings" of the network camera.

・ For details on the procedure, refer to the user's guide of the installed

   wireless LAN card/board.