Toshiba IK-WB01A Manuale Utente

4) Make sure of the reply from the personal computer

to the network camera

   ●

 Start a command prompt. Type as "ping 192.168.0.30" and press  "Enter"

key.

   ●

 If the "Reply from..." message appears, the wireless connection is correctly

established.
・ If a message other than the above appears, reconfirm that the LAN

cable is not connected to another device and reconfirm the settings
configured in (2) and (3).

・ If you can still not ping the camera, connect the personal computer

and the camera with a LAN cable and then check the camera's network
settings to make sure that the wireless LAN settings are set as
described above.

・If there is still a problem, contact the Support Center (→ cover page).

5) Try viewing camera images with "Camera Finder"

(→ page 34)

a) Start "Camera Finder" and click the "Search" button.

   ●

  Confirm  that  the  camera  name  "nwcam01"  and  the  IP  address

"192.168.0.30" are displayed in the camera list.

  ●

 If they are not displayed, perform Step 3) again.

b) Click camera name, "nwcam 01", to select.

  ●

  Confirm that the camera name and the IP address are displayed in red in

the network camera login field.

c) Click the "Administrator" button.
d) When the login screen appears, perform the administrator login (→ page

42).

  ●

  If the login screen is not displayed, select "Customize" from the "View"

menu.

  ●

  In the "Customize" dialog box, check the Browser setting to see whether

a browser has been installed.
・The following shows the default setting.

  C:\Program Files\Internet Explorer\IEXPLORER.EXE

e) When the "Admin Menu" screen is displayed, click the "LIVE" button.

  ●

  Images are displayed in single view.

  ●

  If images are not displayed, check whether JAVA

TM

 2 is installed on the

personal computer.

  ●

  Install JAVA

TM

 2 if it is not installed (→ page 12).

●

 To view an image without using "Camera Finder", start the browser and

perform the administrator login (→page 42). Then click the "Live" button.