Toshiba IK-WB01A Manuale Utente

■ Configuring the camera's wireless LAN settings for

the wireless network environment

Beforehand, connect the LAN cable (straight cable) to a hub that has the
power turned on or connect the LAN cable (crossover cable) to a personal
computer that has the power turned on.

1) Plug in the camera

2) Set the IP address of the personal computer (→page

27)

3) Make sure of the reply from the personal computer

to the network camera (→ page 27)

4) Change the wireless LAN settings of the camera

a) Start the "Camera Finder" (→ page 34) and click the "Administrator"

button.

b) Click "Network Settings" → "Wireless LAN" in the "Admin Menu".
c) Configure the settings to match those of the wireless network

environment.

  ・ The communication mode is set to the adhoc method by default. If

you are going to view images via an access point or wireless
broadband router, be sure to change the communication mode to
infrastructure method.

d) Click the "Save" button.
e) Click the "Reboot" button.

●

 To view an image without using "Camera Finder", start the browser and

perform the administrator login (→page 42). Then click the "Live" button.

5) Change the network information of the camera

a) Start the "Camera Finder" (→ page 34) and click the "Administrator"

button.

b) Click "Network Settings" → "General"
c) Configure the settings to match those of the wireless network

environment.

d) Click the "Save" button.
e) Click the "Reboot" button.

●

 To view an image without using "Camera Finder", start the browser and

perform the administrator login (→page 42). Then click the "Live" button.