Teledyne t320u Manuale Utente
Setup Menu
Teledyne API – Model T300/T300M CO Analyzer
134
5.9.3.9. ADDING A RECORDER OFFSET TO AN ANALOG OUTPUT
Some analog signal recorders require that the zero signal is significantly different from
the baseline of the recorder in order to record slightly negative readings from noise
around the zero point. This can be achieved in the T300/T300M by defining a zero
offset, a small voltage (e.g., 10% of span).
the baseline of the recorder in order to record slightly negative readings from noise
around the zero point. This can be achieved in the T300/T300M by defining a zero
offset, a small voltage (e.g., 10% of span).
To add a zero offset to a specific analog output channel, select the ANALOG I/O
CONFIGURATION submenu (see Figure 5-3) then press:
CONFIGURATION submenu (see Figure 5-3) then press:
06864B DCN6314