Teledyne t320u Manuale Utente

Teledyne API – Model T300/T300M CO Analyzer 

Overview of Operating Modes 

The SETUP mode contains a variety of choices that are used to configure the analyzer’s 
hardware and software features, perform diagnostic procedures, gather information on 
the instrument’s performance, and configure or access data from the internal data 
acquisition system (DAS).  For a visual representation of the software menu trees, refer 
to Appendix A. 

Setup Mode is divided between Primary and Secondary Setup menus and can be 
protected through password security. 

4.3.1. PASSWORD SECURITY 

Setup Mode can be protected by password security through the SETUP>PASS menu 
(Section 5.5) to prevent unauthorized or inadvertent configuration adjustments. 

4.3.2. PRIMARY SETUP MENU   

4.3.3. THE AREAS ACCESSIBLE UNDER THE Setup MODE ARE SHOWN IN 

TABLE 4-4 AND SECONDARY SETUP MENU (SETUP>MORE) 

Analyzer Configuration 

Lists button hardware and software configuration information 

Auto Cal Feature 

Used to set up and operate the AutoCal feature. 
Only appears if the analyzer has one of the internal valve 
options installed. 

and  

Internal Data Acquisition 

(DAS) 

Used to set up the DAS system and view recorded data 

Analog Output Reporting 

Range Configuration 

Used to configure the output signals generated by the 
instruments Analog outputs. 

Calibration Password Security 

Turns the calibration password feature ON/OFF. 

Internal Clock Configuration 

Used to Set or adjust the instrument’s internal clock. 

Advanced SETUP features 

This button accesses the instruments secondary setup menu. 

See 

Table 6-5 

06864B DCN6314