Teledyne t320u Manuale Utente

Overview of Operating Modes

Teledyne API – Model T300/T300M CO Analyzer

4.3.4. SECONDARY SETUP MENU (SETUP>MORE)

Table 4-5:

Secondary Setup Mode (SETUP>MORE) Features and Functions

MODE OR FEATURE

CONTROL

BUTTON

DESCRIPTION

MANUAL

SECTION

External Communication
Channel Configuration

COMM

Used to set up and operate the analyzer’s various serial
channels including RS-232,RS-485, modem communication,
Ethernet and/or USB.

5.7

System Status Variables

VARS

Used to view various variables related to the instruments current
operational status.

 Changes made to any variable are not recorded in the

instrument’s memory until the ENTR button is pressed.

 Pressing the EXIT button ignores the new setting.

5.8

System Diagnostic Features
and
Analog Output Configuration

DIAG

Used to access a variety of functions that are used to configure,
test or diagnose problems with a variety of the analyzer’s basic
systems.
Most notably, the menus used to configure the output signals
generated by the instruments Analog outputs are located here.

5.9

Alarm Limit Configuration

ALRM

Used to turn the instrument’s two alarms on and off as well as
set the trigger limits for each.

5.10

Alarm warnings only present when optional alarm package is activated.

MPORTANT

MPACT ON

EADINGS OR

ATA

Any changes made to a variable during the SETUP procedures are not
acknowledged by the instrument until the ENTR button is pressed. If the
EXIT button is pressed before the ENTR button, the analyzer will beep,
alerting the user that the newly entered value has not been accepted.

06864B DCN6314