Euro-Pro 1104HV Manuale Utente

Caution: Remove the batteries and/or 
disconnect the AC/DC adapter before starting 
to replace the needle.
1. Turn the hand wheel to raise the needle to 

its highest position.  

2. Hold the old needle and loosen the needle 

clamp screw.  Remove the old needle and 
discard responsibly.

3. Insert the new needle into the clamp with 

the flat side toward the right.  Be sure to 
push the needle all the way up into the 
needle clamp before tightening the needle 
clamp screw.

4. Tighten the needle clamp screw.

This sewing machine has been designed to 
sew sleeves or any narrow openings in 
garments.
1. Lift the presser foot.
2. Position the garment over the sewing arm 

and between the platform and the base.

3. Lower the presser foot and follow the 

regular sewing instructions. 

1. Don’t press the On/Off button at the same time as the foot control.
2. Don’t use the batteries and the AC/DC adapter at the same time.
3. Make sure that the batteries are inserted in the correct position.
4. Don’t keep the machine running for too long.
5. Sewing some very stretchy fabrics might result in skipping stitches – use a stretch 

needle.

6. It is not recommended for use on sewing fabrics such as terrycloth.
7. Use AC/DC adapter (6V, 1A) or 4 AA alkaline batteries (1.5 V) only.