3com 3CRUS2475 Manuale Utente
port storm-control broadcast rate
97
port storm-control
broadcast rate
broadcast rate
The port storm-control broadcast rate Interface Configuration
(Ethernet) mode command configures the maximum broadcast rate. To
restore the default configuration, use the no form of this command.
(Ethernet) mode command configures the maximum broadcast rate. To
restore the default configuration, use the no form of this command.
Syntax
port storm-control broadcast rate rate
no port storm-control broadcast rate
Parameters
■
rate — Maximum kilobits per second of broadcast and multicast traffic
on a port. (Range of 3500-1000000)
on a port. (Range of 3500-1000000)
Default Configuration
The default storm control broadcast rate is 3500 Kbits/Sec.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
Use the port storm-control broadcast enable Interface Configuration
mode command to enable broadcast storm control.
mode command to enable broadcast storm control.
Example
The following example configures a port storm-control broadcast rate
4000 on port g2.
4000 on port g2.
show ports
storm-control
storm-control
The show ports storm-control Privileged EXEC mode command
displays the storm control configuration.
displays the storm control configuration.
Syntax
show ports storm-control [interface]
Parameters
■
interface — A valid Ethernet port. Elana
(config)# interface ethernet g2
Console(config-if)# port storm-control broadcast rate 4000