3com 3CRUS2475 Manuale Utente
96
C
HAPTER
5: E
THERNET
C
ONFIGURATION
C
OMMANDS
Example
The following example enables counting broadcast and multicast packets
on Ethernet port 2.
on Ethernet port 2.
port storm-control
broadcast enable
broadcast enable
The port storm-control broadcast enable Interface Configuration
(Ethernet) mode command enables broadcast storm control. To disable
broadcast storm control, use the no form of this command.
(Ethernet) mode command enables broadcast storm control. To disable
broadcast storm control, use the no form of this command.
Syntax
port storm-control broadcast enable
no port storm-control broadcast enable
Default Configuration
Broadcast storm control is disabled.
Command Modes
Interface Configuration (Ethernet) mode
User Guidelines
Use the port storm-control broadcast rate Interface Configuration
(Ethernet) mode command, to set the maximum allowable broadcast
rate.
(Ethernet) mode command, to set the maximum allowable broadcast
rate.
Use the port storm-control include-multicast Global Configuration
mode command to enable counting multicast packets in the storm
control calculation.
mode command to enable counting multicast packets in the storm
control calculation.
Example
The following example enables broadcast storm control on port 1 of a
device.
device.
Console(config)# interface ethernet 2
Console(config-if)# port storm-control include-multicast
unknown-unicast
Console(config)# interface ethernet 1
Console(config-if)# port storm-control broadcast enable