3com 3CRUS2475 Manuale Utente
port storm-control include-multicast (IC)
95
User Guidelines
To control multicasts storms, use the port storm-control broadcast
enable and port storm-control broadcast rate commands.
enable and port storm-control broadcast rate commands.
Example
The following example enables counting multicast packets.
port storm-control
include-multicast
(IC)
include-multicast
(IC)
The port storm-control include-multicast Interface Configuration
(Ethernet) mode command counts multicast packets in broadcast storm
control. To disable counting multicast packets, use the no form of this
command.
(Ethernet) mode command counts multicast packets in broadcast storm
control. To disable counting multicast packets, use the no form of this
command.
Syntax
port storm-control include-multicast [unknown-unicast]
no port storm-control include-multicast
Parameters
■
unknown-unicast — Specifies also counting unknown unicast
packets.
packets.
Default Configuration
Multicast packets are not counted.
Command Modes
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Console# configure
Console(config-if)# port storm-control include-multicast
Console(config-if)# port storm-control iinclude-multicast
unknown-unicast