HP (Hewlett-Packard) 960i Manuale Utente

Pagina di 56
38
Problems encountered during installation
Unpacking
The screws or mounting hardware are not suitable for the server
It is unclear which SCSI ID to use
How should the SCSI bus be configured?
How should the SCSI bus be terminated?
Description
Further information
Some parts appear to be missing or 
damaged.
Contact your vendor if any parts need replacing. 
Description
Further information
Additional parts may be required for fitting 
the tape drive into the server.
The HP StorageWorks Ultrium internal tape drive will 
fit into most servers without the need for additional 
hardware other than that originally shipped with your 
system. If additional parts are required, or the 
original parts have been lost, contact your server 
Description
Further information
It is uncertain which ID numbers are 
available.
Use HP Library & Tape Tools (see page 33) to 
provide information on your current SCSI settings.
The HP StorageWorks Ultrium drive has its SCSI ID 
set to 3 by default. This should be left unchanged 
unless this number is already in use. Full 
instructions on how to change the SCSI ID are 
given on page 11.
Description
Further information
Correct configuration of the SCSI bus 
with multiple drives can be a complex 
area and more help may be required. 
Daisy chaining devices is not generally 
recommended. 
Refer also to the “SCSI Configuration” section in 
the online User’s Guide on the 
HP StorageWorks Tape CD-ROM.
Description
Further information
It is unclear if the bus is already 
terminated or where an additional 
terminator should be placed.
Both ends of a SCSI bus must be terminated.
Typically, when connecting an internal drive to the 
ribbon cable already inside your server then both the 
host bus adapter and the end of the ribbon cable will 
already be terminated and no further action is 
required.
Refer also to the “SCSI Configuration” section in 
the online User’s Guide on the 
HP StorageWorks Tape CD-ROM.
ult960_master_internal.fm  Page 38  Tuesday, September 21, 2004  4:13 PM