Emerson NGA2000 Manuale Utente

90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98

NGA 2000

↓↓

System set up

↓↓

Date and time

↓↓

In the menu "Date and Time" you can set up the date and the time of the control module
(platform or MLT analyzer). You will find the same menu via the "Expert controls and set
up" menus (see 5.4.1 p. 5-49).

Line of variables "Time display format (am/pm)":

In this line you can decide if the time of the control module should be displayed in the 12
hours format or in the 24 hours format.

Line of variables "Network updating":

Select "Enabled" if you want that all modules combined with the platform or MLT analyzer
can use the date and time setup of the control module. Else, select "Disabled".

Set up a new date or time:

1) Press the ENTER key or the 

→

→

 -key in the line "Minutes", "Hours", "Day", "Month" or

"Year" to select the corresponding number.

2) Select any digit with the 

←

←

 -key or the 

→

→

 -key and adjust a new value with the 

↑↑

 -key or

the 

↓↓

 -key.

• 

Options: Minutes: 0 to 59, Hours: 0 to 23, Day: 1 to 28/30/31 depending on the month
selected, Month: 1 to 12, Year: 1996 to 2035.

3) Press the F4 key to set the new date or time. The new adjustment will appear in the line

"Current time". The display in this line will be refreshed every five second.

HOME

ESCAPE

SET

INFO

CLD

95.0 ppm

Date and Time

Time display format (am/pm):

24 Hrs

Minutes:

0

Hours:

12

(Entered as 24Hrs format)

Day:

21

Year:

1998

Current time:

13:48:20  21 Feb 1998

Network updating:

Enabled

Month:

2