Emerson NGA2000 Manuale Utente

NGA 2000

90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98

↓↓

System set up

↓↓

Module binding

↓↓

In the menu "Module Binding" you can bind with the analyzer modules the following types
of micro processor controlled I/O modules connected to the platform:

1) I/O module with three alarms
2) Autocal I/O
3) Syscal I/O

You can unbind all existing bindings between the analyzer module and the I/O modules if
you press the F4 key (UNBIND) or if you press the ENTER key or the 

→

→

 -key in the line

"Unbind everything!".

Module binding:

1) Select the channel you want:

♦ 

Change to the "Main Menu" with the F1 key (HOME).

♦ 

With the F3 key (NEXT) in the "Main Menu" you can select the analyzer module you
want to bind with an I/O module:
The channel selected will appear in the tag (left above in the headline of the display).

♦ 

Go back to the menu "Module Binding" via the menus "Technical level configuration"
and "System set up":
The tag of the analyzer module selected will appear in the line "Analyzer module
selected".

2) Select the I/O module you want:

♦ 

Press the ENTER key or the 

→

→

 -key in the line "Select modules..." to change to the

submenu "Select I/O modules":

HOME

ESCAPE

BIND

UNBIND

INFO

CLD

95.0 ppm

Module Binding

Select modules...

Proposed bind:

NONE

View bindings...

Bind selections!
Unbind everything!

Analyzer module selected:

CLD