Emerson NGA2000 Manuale Utente

90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98

NGA 2000

♦ 

Change to the line you want with the 

↑↑

 -key or the 

↓↓

 -key.

If there exist more than eight unbound I/O modules (e.g. Autocal I/O) you can change to
another menu page with the F3 key (MORE).

♦ 

Press the ENTER key or the 

→

→

 -key to select the tag of the I/O module you want:

The display will go back to the menu "Module Binding" automatically.
The tag of the I/O module selected will appear in the line "Proposed bind".

3) Binding:

♦ 

Press the ENTER key or the 

→

→

 -key in the line "Bind selections!" or press the F3 key

(BIND) to bind the modules selected:
The control module will change to the initializing mode and the binding will be done,
automatically.

♦ 

Repeat the steps 1) to 3) to bind further modules you want.

4) Check bindings:

♦ 

Press the ENTER key or the 

→

→

 -key in the line "View bindings..." to change to the

submenu "Modules Bound" where you will find all I/O modules bound to the channel
selected:

HOME

ESCAPE

MORE

BACK

INFO

CLD

95.0 ppm

Select IO modules

Select the modules you wish to bind to the current

I/O module with 3 alarms

analyzer.

Autocal I/O

Syscal I/O

HOME

ESCAPE

NEXT

INFO

CLD

95.0 ppm

Modules Bound

Auxiliary module:

Syscal I/O

Auxiliary module:

NONE

Auxiliary module:

NONE

Auxiliary module:

NONE

Auxiliary module:

NONE

Proposed new bind:

NONE

Analyzer module selected:

CLD

Auxiliary module:

NONE