Compaq Infortrend Manuale Utente

seconds to display the confirm box.
Press  ENT  for two seconds to start
initializing the logical volume.

The logical volume has been
successfully created.

Press  ESC to clear the message.
Another message will prompt, press
ESC to clear it.   

Logical volume information will be
displayed below. 

If you have two controllers, you may
choose to assign this logical volume to
the secondary controller.  The
assignment can be done during or after
the initial configuration.  

If the redundant controller function has
been enabled, secondary controller IDs
assigned to IO channels, the
assignment menus should appear as
listed on the right.               

If settings related to redundant
controllers have not been
accomplished, you may find the option
after the volume is successfully created.   

Press ENT on a configured logical
volume.  Use arrow keys to select
“Logical Volume Assignment..”, and
press  ENT to proceed.  Press ENT for
two seconds to confirm.     

Press  ESC, and the LCD will display
the logical volume’s information when
initialization is finished

.

Create
Logical Volume ?

Lv=0 Creation
Completed

LV=0 ID=685AE502
2021MB   DRV=1

Logical Volume
Assignment    ..

Red Ctlr Assign
to Sec. Ctlr   ?

Create Logical
Volume Successed

Lv=0 ID=07548332
0024488MB DRV=2

Logical Volume
Assignments   ..

Red Ctlr Assign
to Sec. Ctlr   ?

Change Logical
Volume Params  ?