Compaq Infortrend Manuale Utente

Partitioning, as well as the creation of logical volume, are not the
requirements for creating a RAID system.  The configuration
processes for partitioning a logical drive are the same as those for
partitioning a logical volume.

Press ENT for two seconds to enter the
Main Menu.  Press ▼ or ▲ to select
"View and Edit Logical Volume," then
press ENT.

Press ▼ or ▲ to select a logical volume,
then press ENT.

Press  ▼ or ▲ to select “Partition
Logical Volume,” then press ENT.

The total capacity of the logical volume
will be displayed as the first partition
(partition 0).  Press ENT  for two
seconds to change the size of the first
partition.

Use  ▼ or ▲ to change the number of
the flashing digit, (see the arrow mark)
then press ENT to move to the next
digit.  After changing all the digits,
press  ENT for two seconds to confirm
the capacity of this partition.  You may
also  use  arrow  keys  to  move  down  to
the next partition.

The rest of the drive space will be
automatically allocated as the last
partition.  You may go on to create up
to 32 partitions using the same method
as described above.

Press ESC for several times to go back
to the main menu.

View and Edit
Logical Volume 

↕

LV=0 ID=685AE502
2021MB DRV=1

Partition
Logical Volume..

LV=0   Part=0:
   2021MB

LV=0 Part=0:
  700MB       ?

LV=0 Partition=1
  1321MB       ?

LV=0   Part=0:
    2021MB     ?