Compaq Infortrend Manuale Utente

The process of mapping a logical drive is identical to that of
mapping a logical volume.  The process of mapping a logical volume
is used as an example.

Press ENT for two seconds to enter the
Main Menu.  Press ▼ or ▲ to select
"View and Edit Host Luns," then press
ENT.

Note some details before proceeding:

1.  A logical group of drives (logical drive/logical volume)

previously assigned to the primary controller can not be mapped
to a secondary ID.  Neither can those assigned to the secondary
controller be mapped to a primary ID.

2.  For a SCSI-based controller, ID 7 is reserved for the controller

itself.  If there are two controllers, controllers might occupy ID 6
and ID 7.  Please check your system Hardware Manual for
details on preserved IDs.

Press  ▼ \or ▲ to select a configured
host ID, and then press ENT for two
seconds to confirm.  IDs are available
as Primary or Secondary Controller
IDs.

Press  ▼ or ▲ to select the type of
logical configuration.  Available
choices are “Map to Logical Volume,”
“Map to Logical Drive,” or “Map to
Physical Drive.”  Confirm your choice
by pressing ENT.

Press ▼ or ▲ to select a LUN number,
then press ENT to proceed.

Press  ENT for two seconds to confirm
the selected LUN mapping.

Press ▼ or ▲ to select a partition from
the logical volume.  Press ENT for two
seconds to map the selected partition
to this LUN.  If the logical
configuration has not been partitioned,

View and Edit
Host Luns      

↕

CH=0 ID=000
Pri. Ctlr     ..

CH=0 ID=0 LUN=0
Not Mapped

LV=0 ID=685AE502
2021MB     DRV=1

LV=0 PART=0
   700MB      ?

Map Host LUN   ?

Map to
Logical Volume ?