NEC NDA-30115-001 Manuale Utente
NDA-30115 Revision 1.0
Page 41
Property Management System - Communication Interface
Message Formats
Check In/Check Out (Model 60)
These messages do not represent unique features as such, but are a convenient tool
for activating a sequence of functions commonly performed when a guest checks
in or out of a room. These messages are exclusively used by the Model 60 with the
sole exception of Check Out Outgoing Call Report (16-C) which is also used by the
Model 90 version.
for activating a sequence of functions commonly performed when a guest checks
in or out of a room. These messages are exclusively used by the Model 60 with the
sole exception of Check Out Outgoing Call Report (16-C) which is also used by the
Model 90 version.
The Feature Codes are as follows:
•
16-1 -- Check In 1
•
16-2 -- Check Out
•
16-5 -- Check Out Message Waiting Lamp Off Report
•
16-6 -- Check Out Message Waiting Lamp On Report
•
16-A -- Check In 2
•
16-B -- Check In 3
•
16-C -- Check Out Outgoing Call Report
•
16-D -- Check Out Message Waiting Report
Check In 1
Figure 4-10 Check In 1
The only message field is the extension number who is being checked in. If the
extension number is less than six digits, left justify the number and fill the
remaining bytes with space (20H) characters. The Room Status is set to “Stay” and
Room Cut-Off is cancelled.
extension number is less than six digits, left justify the number and fill the
remaining bytes with space (20H) characters. The Room Status is set to “Stay” and
Room Cut-Off is cancelled.
‘1’ ‘6’
‘1’
‘1’
‘1’ Extension
0
1
2
3
4
6
8
9
15
16
STX
SA
UA
EI
FTC
MSC
FC
6
02H ‘1’
‘!’
‘L’
03H xx
ETX BCC