Cisco Systems 7609 Manuale Utente
Chapter 3 Installing the Cisco 7609 Internet Router
Installing the Stabilizer Kit
3-10
Cisco 7609 Internet Router Installation Guide
OL-5079-04
Installing the Stabilizer Kit
Note
The stabilizer kit is included only in the accessory kits for the Cisco 7609
Internet Router.
Internet Router.
If you are not installing the Cisco 7609 Internet Router in a rack, you must install
stabilizer brackets to the bottom of the chassis. The stabilizer brackets reduce the
possibility that the freestanding chassis will tip over.
stabilizer brackets to the bottom of the chassis. The stabilizer brackets reduce the
possibility that the freestanding chassis will tip over.
Open the stabilizer kit package and use the kit contents list in
to verify
that all parts are included.
Note
Have a second person available to perform this procedure.
To install the stabilizer brackets, perform these steps:
Step 1
Have one person tilt and hold the chassis to one side.
Step 2
With the chassis tilted, attach the stabilizer bracket to the side of the chassis with
the eight M4 screws as shown in
the eight M4 screws as shown in
Table 3-2
Stabilizer Kit Contents
Quantity
Part Description
Received
16
M4 Phillips countersunk-head screws
2
Stabilizer brackets