Cisco Systems Cisco 12816 Manuale Utente

Pagina di 416
 
Chapter 7      Maintaining the Router
Removing and Replacing AC and DC Power Subsystem Components
7-30
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
OL-11495-01
Power Supply and Power Shelf Compatibility
Cisco 12016 series routers are available with either an AC or a DC power supply 
system. Two types of power supplies are available for these systems:
  •
Original power supplies (rated at 2000 W)—Shipped with original systems
  •
Upgraded replacement power supplies (rated at 2500 W AC or 
2400 W DC)—Ships currently
Removal and replacement procedures are the same for either type of power 
supply, but because of their capacity and physical differences, you cannot mix 
different types of power supplies within the same power shelf.
Caution
Newer power supplies (AC and DC) require upgraded power shelves. You cannot 
install a new power supply using the original power shelf. If you are replacing an 
older power supply with a new unit, you must replace all of the power supplies 
and the power shelf.
Before you attempt to install or replace them, be sure you know the power 
supplies and associated power shelf your system has (
Table 7-1
Original and Replacement Components
Original Component
Replacement Component
AC Power Shelf (PWR-GSR16-AC-SH=)
Compatible only with 2000 W AC power 
supplies. Do not use with newer, 2500 W 
power supplies.
AC Power Shelf (12000/16-AC-SHELF=)
Compatible only with newer, 2500 W AC power 
supplies. Do not use with older, 2000 W power 
supplies.
Optional AC Power Shelf (PWR-GSR16-AC4-SH=)
Compatible only with 2000 W AC power 
supplies. Do not use with newer, 2500 W 
power supplies.
Optional AC Power Shelf (12000/16-AC4-SHLF=)
Compatible only with newer, 2500 W AC power 
supplies. Do not use with older, 2000 W power 
supplies.