Avaya X330W2-DS1 Manuale Utente

Chapter 7

X330WAN CLI Commands

54

Avaya X330W-2DS1 User’s Guide

Output Example:
To disable the automatic disconnection of idle sessions:
X330WAN-2DS1-1(super)# set logout 0
Sessions will not be automatically logged out.

Use the set snmp trap commands to add an entry into the SNMP trap receiver 
table and to enable or disable the different SNMP traps for a specific receiver. First 
add the 

rcvr_addr and then enable/disable the different traps for it.

The syntax for this command is:

 <rcvr_addr>

 <rcvr_addr> {enable|disable} 

{all|vlan_violation|...}

Output Example:
To enable SNMP vlan_violation traps to a specific manager:
X330WAN-2DS1-1(super)# set snmp trap 192.168.173.42 enable 
vlan_violation
SNMP vlan_violation change traps enabled.

Output Example:
To enable all traps to a specific manager:
X330WAN-2DS1-1(super)# set snmp trap 192.168.173.42 enable all
All SNMP traps enabled.

Output Example:
To disable SNMP 

vlan_violation traps to a specific manager:

X330WAN-2DS1-1(super)# set snmp trap 192.168.173.42 disable 
vlan_violation
SNMP vlan_violation traps disabled.

enable

Activate SNMP traps

disable

Deactivate SNMP traps

all

(Optional) Specify all trap types

vlan_violation

(Optional) Specify the vlan violation trap from the TRAP-MIB.

rcvr_addr

IP address or IP alias of the system to receive SNMP traps