Avaya X330W2-DS1 Manuale Utente
Chapter 7
X330WAN CLI Commands
56
Avaya X330W-2DS1 User’s Guide
The syntax for this command is:
set system location
[location string]
Example:
set system location "Floor 5,Room 12"
set system location "Floor 5,Room 12"
set system name
Use the set system name command to set mib2 system name MIB variable.
The syntax for this command is:
set system name
[name string]
Example:
set system name "Banking System"
set system name "Banking System"
set time client
The set time client command is used to enable or disable the periodic
network time acquisition by the device from the network time server (SNTP or
TIME protocol).
network time acquisition by the device from the network time server (SNTP or
TIME protocol).
The syntax for this command is:
set time client
{enable|disable}
set time protocol
Use the set time protocol command to set the protocol for use in the system as either
SNTP protocol or TIME protocol.
SNTP protocol or TIME protocol.
The syntax for this command is:
set time protocol
[sntp-protocol|time-protocol]
location string
Location name. The location name is cleared if this field is left
blank. A string of 2 words or more must be type in quotation
marks – e.g. “Operations Floor”.
blank. A string of 2 words or more must be type in quotation
marks – e.g. “Operations Floor”.
name string
System name. The system name is cleared if this field is left
blank. A string of 2 words or more must be type in quotation
marks – e.g. “Backbone Stack”.
blank. A string of 2 words or more must be type in quotation
marks – e.g. “Backbone Stack”.