Avaya X330W2-DS1 Manuale Utente
General: Device Commands
Avaya X330W-2DS1 User’s Guide
55
Output Example:
To add an entry in the SNMP trap receiver table with default:
X330WAN-2DS1-1(super)# set snmp trap 192.168.173.42
SNMP trap receiver added.
To add an entry in the SNMP trap receiver table with default:
X330WAN-2DS1-1(super)# set snmp trap 192.168.173.42
SNMP trap receiver added.
set snmp trap auth
Use the set snmp trap auth commands to enable/disable the sending of
SNMP traps upon SNMP authentication failure.
SNMP traps upon SNMP authentication failure.
The syntax for this command is:
set snmp trap
{enable|disable} auth
Output Example:
X330WAN-2DS1-1(super)# set snmp trap enable auth
Authentication trap enabled
X330WAN-2DS1-1(super)# set snmp trap enable auth
Authentication trap enabled
set system contact
Use the set system contact command to set mib2 system contact MIB
variable.
variable.
The syntax for this command is:
set system contact
[contact string]
Example:
set system contact "Gabby ext.545"
set system contact "Gabby ext.545"
set system location
Use the set system location command to set the mib2 system location MIB
variable.
variable.
contact string
Contact person. The contact person field is cleared if this field is
blank. A string of 2 words or more must be type in quotation
marks – e.g. “Yigdal Naouri”.
blank. A string of 2 words or more must be type in quotation
marks – e.g. “Yigdal Naouri”.