Avaya X330W2-DS1 Manuale Utente
Chapter 7
X330WAN CLI Commands
76
Avaya X330W-2DS1 User’s Guide
The syntax for this command is:
[no] ip ospf router-id
<router id>
Example:
X330WAN-2DS1-1(configure)# ip ospf router-id 192.168.49.1
ip proxy-arp (Interface context)
Use the
ip proxy-arp command to enable proxy ARP on an interface. The no
form of this command disables proxy ARP on an interface.
Note:
This command is executed from the Fast Ethernet and Fabric Fast Ethernet
interfaces.
The syntax for this command is:
[no] ip proxy-arp
[no] ip proxy-arp
Example:
To disable proxy ARP on interface marketing:
To disable proxy ARP on interface marketing:
X330WAN-2DS1-1(configure)# no ip proxy-arp
ip redirect (Interface context)
Use the
ip redirect command to enable the sending of redirect messages on
the interface. The
no form of this command disables the redirect messages. By
default, sending of redirect messages on the interface is enabled.
Note:
This command is executed from the Serial, Fast Ethernet and Fabric Fast
Ethernet interfaces.
The syntax for this command is:
[no] ip redirects
[no] ip redirects
Examples:
X330WAN-2DS1-1(configure)#
ip redirect
X330WAN-2DS1-1(super-if:FastEthernet1)# ip redirects
router id
IP address