Avaya X330W2-DS1 Manuale Utente

Layer 3 CLI Commands

Avaya X330W-2DS1 User’s Guide

77

Use the

 ip rip authentication key command to set the authentication 

string used on the interface. The

 no form of this command clears the password.

This command is executed from the Serial, Loopback, Fast Ethernet and 

Fabric Fast Ethernet interfaces.

The syntax for this command is:
[no] ip rip authentication key <password>

Example:

X330WAN-2DS1-1(configure)# ip rip authentication key hush-hush

Use the

 ip rip authentication mode command to specify the type of 

authentication used in RIP Version 2 packets. The 

no form of this command restores 

the default value of none.

This command is executed from the Serial, Loopback, Fast Ethernet and 

Fabric Fast Ethernet interfaces.

The syntax for this command is:
[no] ip rip authentication mode [simple|none]

Example:
To specify simple authentication to be used in RIP Version 2 packets on the interface 
“marketing”. 

X330WAN-2DS1-1(configure)# ip rip authentication mode simple

password

The authentication string for the interface. Up to 16 characters are 
allowed.

simple|none

The authentication type used in RIP Version 2 packets:
• simple - clear text authentication.
• none - no authentication.