Cabletron Systems 9W111-08 Manuale Utente
2-3
The Reset Switch
The Reset Switch
The Reset switch is located on the front panel, under the top plastic tab, as shown
in Figure 2-2. It serves two functions:
in Figure 2-2. It serves two functions:
•
Pressing the Reset switch twice within three seconds causes the processor to
reset.
reset.
•
Pressing and holding the switch on for three or more seconds causes the
module to shutdown. Pressing and holding again for three seconds restarts the
module.
module to shutdown. Pressing and holding again for three seconds restarts the
module.
SNMP management may be used to disable this switch to enhance module
security.
security.
Figure 2-2. The Reset Switch
SMB
CPU
Reset Switch