Cabletron Systems 9W111-08 Manuale Utente
Installing the MMAC-Plus Module
2-4
Setting the FNB Switch
The 9W111-08 module can attach to ether FNB-1 or FNB-2. Figure 2-3 shows the
location of the FNB switch, SW201. When this switch is up (toward the top of the
module) the 9W111-08 attaches to FNB-2. When down, it attaches to FNB-1.
location of the FNB switch, SW201. When this switch is up (toward the top of the
module) the 9W111-08 attaches to FNB-2. When down, it attaches to FNB-1.
Figure 2-3. Location of the FNB Switch
Local Management Console
Local Management is accessed by attaching a management console at the RJ-45
COM port of the 9W111-08. The console connection supports a Digital Equipment
Corporation VT 320™ terminal or PC emulation of one of these terminals.
COM port of the 9W111-08. The console connection supports a Digital Equipment
Corporation VT 320™ terminal or PC emulation of one of these terminals.
Table 2-1 lists the setup requirements for the local management console. If your
terminal is a Digital Equipment Corporation VT 320™ terminal, press
terminal is a Digital Equipment Corporation VT 320™ terminal, press
F3
to access
the Setup Directory. If you have a terminal emulation of the Digital Equipment
terminals, refer to your equipment user manual for setup procedures.
terminals, refer to your equipment user manual for setup procedures.
SW201
AUX and
COM Ports
COM Ports