Sanyo PLC-XU355K Manuale Utente

While  pressing  the  MENU

button,  press  the  IMAGE

button  number  of  times

corresponding to the remote

control code.

The remote control can be used as a wireless mouse for your computer.

Act as left (click) mouse

button while the projector

and a computer are

connected with a USB

cable.

Move the pointer on the screen

with this button.

Act as right (click) mouse

button while the projector and a

computer are connected with a

USB cable.

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote

control  codes  prevents  interference  from  other  remote  controls  when  several  projectors  or  video  equipment

next to each other are operated at the same time. Change the remote control code for the projector first before

changing that for the remote control. See "Remote control" in the Setting Menu on page 55.

Press  and  hold  the  MENU  and  IMAGE  buttons  for

more than five seconds to switch between the codes.

The  code  switches  sequentially  for  one  pressing  the

IMAGE button. See the list below.

To initialize the remote control code, slide the RESET/

ON/ALL-OFF  switch  to  RESET,  and  then  to  ON. The

initial code is set to Code 1.

Before operating the wireless mouse, connect

your computer and the projector with a USB

cable  (not  supplied).  See  “Connecting  to  a

Computer”  on  page  16.  When  the  Pointer

function  is  used,  the  wireless  mouse  is  not

available.

When  a  USB  cable  is  connected  to  the

computer  and  the  projector,  turn  on  the

projector  first,  then  the  computer.  If  you  turn

on  the  computer  first,  the  wireless  mouse

function may not operate correctly.