Lucent Technologies P332MF Manuale Utente
Chapter 6
Cajun Campus CLI – Layer 2
Cajun P332MF User’s Guide
79
Set port redundancy Commands
Use the
set port redundancy commands to enable or disable the defined
redundancy schemes. Using this command will not delete existing redundancy
entries.
entries.
Note: You must disable Spanning Tree before you can enable redundancy.
The syntax for this command is:
set port redundancy {enable|disable}
set port redundancy {enable|disable}
Example:
Cajun_P330-N# set port redundancy enable
All redundancy schemes are now enabled
Cajun_P330-N# set port redundancy enable
All redundancy schemes are now enabled
Set port mirror Command
Use the
set port mirror command to define a port mirroring source-
destination pair in the stack.
The syntax for this command is:
set port mirror source-port <mod_num>/<port_num> mirror-port
<mod_num>/<port_num> sampling {always|disable} direction {rx|both}
set port mirror source-port <mod_num>/<port_num> mirror-port
<mod_num>/<port_num> sampling {always|disable} direction {rx|both}
Example:
Cajun_P330-N# set port mirror source-port 1/9 mirror-port 1/10
sampling always direction both
Mirroring both Rx and Tx packets from port 1/9 to port 1/10 is
enabled
Cajun_P330-N# set port mirror source-port 1/9 mirror-port 1/10
sampling always direction both
Mirroring both Rx and Tx packets from port 1/9 to port 1/10 is
enabled
always
Keyword to activate the port mirroring entry
disable
Keyword to change the status of the port mirroring entry to “not ready”
rx
Keyword to copy only incoming traffic
both
Keyword to copy both incoming and outgoing traffic