Lucent Technologies P332MF Manuale Utente

Chapter 6

Cajun Campus CLI – Layer 2

Cajun P332MF User’s Guide

81

Example:

These examples show how to use the

 set port flowcontrol command set:

Cajun_P330-N# set flowcontrol receive 1/51 on
Port 1/51 flow control receive administration status set to on
(port will require far end to send flowcontrol)

Cajun_P330-N# set flowcontrol send 1/51 off
Port 1/51 flow control send administration status set to off
(port will send flowcontrol to far end)

Cajun_P330-N# set flowcontrol all 1/17 proprietary
Port 1/17 flow control administration status set to 
proprietary

The

 set auto-negotiation-flowcontrol-advertisement command sets the 

flowcontrol advertisement for a Gigabit port when performing autonegotiation.

The syntax for this command is:
set auto-negotiation-flowcontrol-advertisement <mod_num>/
<port_num> {no-flowcontrol|asym-tx-only|sym-only|sym-and-asym-rx}

all

Controls the sending and receipt of flow-control frames for any type 
of ports:
• ON indicates that the local port will both act upon and send 

IEEE802.3x flow control frames

• OFF indicates that the local port will both discard and not send 

flow control frames (of any type)

• PROPRIETARY indicates that the local port will both act upon and 

send Lucent proprietary flow control frames.

no-flowcontrol

The port will advertise no pause capabilities

asym-tx-only

The port will advertise asymmetric Tx pause capabilites only

sym-only

The port will advertise symmetric pause capabilites only

sym-and-asym-rx

The port will advertise both symmetric and asymmetric Rx  
pause capabilites