Lucent Technologies P332MF Manuale Utente

Chapter 6

Cajun Campus CLI – Layer 2

82

Cajun P332MF User’s Guide

Example:
Cajun_P330-N#  set auto-negotiation-flowcontrol-advertisement 
1/51 asym-tx-only

Cajun_P330-N# Port 1/51 pause capabilities was set

Use the

 set trunk command to configure the tagging mode.

The syntax for this command is:
set trunk <mod_num>/<port_num> {off|dot1q}

Example:
Cajun_P330-N# set trunk 1/19 dot1q
Dot1Q VLAN tagging set on port 1/19.

Cajun_P330-N# set trunk 1/19 off
No VLAN tagging set on port 1/19.

Use the

 set spantree command to enable/disable the spanning-tree protocol 

for the stack.

The syntax for this command is:
set spantree {enable|disable}

Example:
Cajun_P330-N# set spantree enable
bridge spanning tree enabled.

off

Forces the port to become a non-tagging port. The port is in the 
clear (tagging) mode: it will never send frames as tagged, but it 
will correctly interpret received tagged frames. 

dot1q

Forces the port to become a 802.1Q tagging port. The port is in 
the tagging mode: it will send frames as tagged and will 
correctly interpret received untagged frames.