Insys MoRoS ISDN 1.1.1 11-02-06-02-01.005 Manuale Utente

Functions 

MoRoS Modem/ISDN 

20

 

 

June 06

 

The MoRoS can be operated as DHCP client or DHCP server.  

 

Only one of the two services may be active simultaneously. Both services may be 
deactivated. These settings only apply to the local LAN.  

¾

  If no further network subscribers will be connected to the MoRoS after the initial 

installation, the DHCP client as well as the DHCP server should be deactivated. All 
network subscribers must be assigned a static IP address. These settings will 
ensure that all IP addresses remain unaltered. 

¾

  If devices must be connected to the network after the initially installed devices, 

DHCP server operation is recommended. In this operational mode, it is not 
necessary to know the network settings for the connection of new devices such as 
a laptop for maintenance purposes. The newly connected devices (DHCP clients) 
will automatically be integrated into the network with this new setting. Here, 
also, it must be considered that all other network participants must receive static 
IP addresses to guarantee accessibility from outside. 

The MoRoS can only be operated as DHCP client, if a DHCP server is operated in the 
adjacent Ethernet network. This server will assign an IP address to the MoRoS. If 
necessary, the server will assign a new IP address after the lease time has expired (the 
lease time is the time that a client is assigned or “leased" an IP address). 

   When the MoRoS is assigned a new IP address from the DHCP server, the