Insys MoRoS ISDN 1.1.1 11-02-06-02-01.005 Manuale Utente
Codici prodotto
11-02-06-02-01.005
Functions
MoRoS Modem/ISDN
22
June 06
The MoRoS ISDN can be assigned a phone number in the field "MSN" (Multiple Subscriber
Number). From this time on the ISDN-TA can only be reached with this phone number.
Alternatively, "*" may be entered. In this case, the ISDN-TA responds to all incoming calls.
This is the standard setting. This setting, however, may result in problems with other bus
participants at the S0 bus.
Number). From this time on the ISDN-TA can only be reached with this phone number.
Alternatively, "*" may be entered. In this case, the ISDN-TA responds to all incoming calls.
This is the standard setting. This setting, however, may result in problems with other bus
participants at the S0 bus.
Further below, the phone numbers can be set which are permitted to establish a
connection to the MoRoS. The prerequisite is that the phone numbers are transferred
during a call (CLIP). This requires the activation of the according service at the caller's
phone provider. The calling device must communicate its phone number. If this is not the
case, no connection can be established.
connection to the MoRoS. The prerequisite is that the phone numbers are transferred
during a call (CLIP). This requires the activation of the according service at the caller's
phone provider. The calling device must communicate its phone number. If this is not the
case, no connection can be established.
AT commands may be entered in the field “Terminal”. This command is sent directly to
the ISDN-TA of the MoRoS. The reply of the ISDN-TA is displayed below the entry field.
the ISDN-TA of the MoRoS. The reply of the ISDN-TA is displayed below the entry field.
6.4 Modem
This section only applies to the MoRoS Modem.
The configuration can only take place if neither Dial-In nor Dial-Out are
active.