Mustang Survival MD1250 Manuale Utente

4.  Release the mouthpiece, and turn the locking ring counterclockwise to 

close the inflator valve and lock the mouthpiece in place.

5.  Complete repacking of the LP – see Repacking the LP.

1.  Open the zippers completely, wipe off any 

water, and place the LP on a smooth, flat 
surface with the hydrostatic inflator facing 
the user.

2.  Hold the CO

2

 cylinder through the fabric 

and insert the metal key between the black 
locking ring and the inflator cap.

3.  Twist the key counter-clockwise to turn 

the black locking ring counter-clockwise to 
unlock it (Figure 10).

4.  Remove and discard the yellow inflator cap.
5.  Elongate the inflation cell sealing ring by 

carefully squeezing it.

6.  Remove and discard the inflator body 

(Figure 11). 

7.  Visually Inspect the sealing ring for cracks, 

debris, or other damage. If damage is 
present, remove the LP from service for 
further inspection and assessment.

8.  Ensure that the status indicator on the replacement inflator body is 

green, and the expiry date has not passed. If the status indicator is red, 
acquire a new inflator body.

9.  Insert the replacement inflator body inside the LP with the CO

2

 cylinder 

pointing upward, and let the sealing ring rest on the adapter around 
the four lugs.

10.  Hold the CO

2

 cylinder through the fabric 

of the LP and position the replacement 
inflator cap with the hydrostatic water inlet 
valve pointing to the right ensuring that 
the inflator cap is properly seated on the 
inflator body and sealing ring (Figure 12).

11.  While pressing firmly onto the inflator body, 

turn the black locking ring clockwise to the 
locked position, and pull on the inflator cap 
to ensure it is locked onto the inflator body.

Figure 10

Status

Indicator

Center 

Shaft

Sealing 

Ring

Figure 11

Figure 12

Tactical Inflatable Side Pouch LP 

 

6