Hoshizaki F-300BAF Manuale Utente

32

[1] Abnormal noise

a)Fan Motor

1. Bearing worn out.

1. Replace.

2. Fan blade deformed.

2. Replace fan blade.

3. Fan blade does not 

move freely.

3. Replace.

b)Compressor 

1. Bearings worn out, or 

cylinder valve broken.

1. Replace.

2. Mounting pad out of 

position.

2. Reinstall.

c) Refrigerant Lines

1. Rub or touch lines or 

other surfaces.

1. Replace or separate.

d)Gear Motor 

1. Bearing or gear worn 

out / damaged.

1. Replace.

e)Evaporator

1. Low refrigerant 

pressures.

1. Check charge, check for 

possible leak, repair,
re-charge.

2. Expansion valve bad. 2. Replace.
3. Evaporator bad.

3. Replace.

4. Scale on inside wall of 

freezing cylinder.

4. Use "SCALE AWAY" to 

clean periodically. If the 
water is found hard by 
testing, install a softener.

[2] Overflow from 

reservoir (water does 
not stop).

a)Water Supply

1. Water pressure too 

high.

1. Install a pressure reducing 

valve.

b)Water Valve

1. Diaphragm does not 

close.

1. Clean or replace.

c) Float Switch

1. Bad contacts.

1. Check for continuity and 

replace.

d)Water Control Relay

1. Bad contacts.

1. Replace

[3] Gear motor protector 

operates frequently or 
fuse blows frequently.

a)Power Supply Voltage

1. Too high or too low.

1. Connect the unit to a 

power supply of proper 
voltage.

b)Evaporator Assembly

1. Bearings or auger 

worn out.

1. Replace bearings or 

auger.

c) Bin Control

1. Bad contacts.

1. Check for continuity and 

replace.

2. Actuator does not 

move freely.

2. Clean shaft and its 

corresponding holes or 
replace bin control.