England's Stove Works 55-SHPEP Manuale Utente

Page | 19  

 

Error codes, or “E-Codes,” are alphanumeric codes that will appear in the Heat 

Range and Blower Speed windows of the Control Board if the unit experiences an 
abnormal condition.  Error codes are the control board’s way of telling the user that 
something isn’t operating correctly within the stove, and that the unit should be 
carefully inspected before reigniting.  See the “Trouble-Shooting Guide,” page 36, 
for additional information on error codes. 

 E-0 

¾  When this is displayed in the control board windows (typically when 

restarting after an “E-Code” shutdown), it means there are currently no 
errors and the stove will begin normal operation. 

 E-1 

¾  This error code is not used on this stove.  If it is displayed in the control 

board windows, please contact Technical Support and they will diagnose 
the cause of the false code. 

 E-2 

¾  When this code is displayed in the control board window it indicates a 

failure to light.  Although the stove may have ignited the pellets, the 
control board did not register a high enough temperature to determine the 
fire was lit.  If a fire was ignited, wait for the unit to cool, clean the 
burnpot and restart the unit. 

 E-3 

¾  This error code indicates the preset maximum allowable exhaust 

temperature was exceeded.  Commonly referred to as “Over-Firing,” the 
E-3 code means something in the stove is causing the exhaust gas to be 
hotter than expected.   

 E-4 

¾  This code is displayed based on a drop in the exhaust temperature.  This 

code means the fire or “proof of flame” has been lost.  It usually results 
from the hopper being empty.