Alcatel-Lucent 6850-48 参照ガイド
Chassis Management and Monitoring Commands
page 2-46
OmniSwitch CLI Reference Guide
September 2009
show module status
Displays the basic status information for either a specified module or all modules installed in a standalone
switch chassis or a stack. Modules include switches performing the primary and secondary CMM roles
and Network Interface (NI) in a stack.
switch chassis or a stack. Modules include switches performing the primary and secondary CMM roles
and Network Interface (NI) in a stack.
show module status [number]
Syntax Definitions
number
The slot number for a specific module installed in a standalone switch
chassis or the switch number within a stack. If no slot number is speci-
fied, status information for all modules is displayed.
chassis or the switch number within a stack. If no slot number is speci-
fied, status information for all modules is displayed.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E.
Usage Guidelines
This command may be used when logged into the switch that performs either as the primary or secondary
CMM role in a stack.
CMM role in a stack.
Examples
-> show module status
Operational Firmware
Slot Status Admin-Status Rev MAC
------+-------------+------------+---------+-----------------
CMM-1 UP POWER ON N/A 00:d0:95:a3:e5:09
NI-1 UP POWER ON N/A 00:d0:95:a3:e5:0b
output definitions
Slot
The chassis slot position of the module. For detailed slot numbering
information, refer to the “Chassis and Power Supplies” chapter of the
Hardware User Guide. Refer to
information, refer to the “Chassis and Power Supplies” chapter of the
Hardware User Guide. Refer to
for additional information
on CMM callouts.
Operational Status
The operational status of the module. Options include UP or DOWN.
For NI and secondary CMM modules, the operational status can be
DOWN while the power status is on, indicating a possible software
issue.
For NI and secondary CMM modules, the operational status can be
DOWN while the power status is on, indicating a possible software
issue.
Admin-Status
The current power status of the module. Options include POWER ON
or POWER OFF.
or POWER OFF.