Netgear gsm7312 Manuale Utente
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Routing Commands
8-33
202-10009-01
config router vrrp interface ipaddress
This command sets the ipaddress value for a virtual router. The value for <ipaddr> is the IP
Address which is to be configured on that interface for VRRP. The parameter <vrID> is the virtual
router ID which has an integer value range from 1 to 255.
Address which is to be configured on that interface for VRRP. The parameter <vrID> is the virtual
router ID which has an integer value range from 1 to 255.
Default
There is no default value for ipaddress.
Format
config router vrrp interface ipaddress <slot.port>
<vrID> <ipaddr>
config router vrrp interface preemptmode
This command sets the preemption mode value for the virtual router configured on a specified
interface. The parameter <vrID> is the virtual router ID which has an integer value ranges from 1
to 255.
interface. The parameter <vrID> is the virtual router ID which has an integer value ranges from 1
to 255.
Default
enable
Format
config router vrrp interface preemptmode <slot.port>
<vrID> <enable/disable>
config router vrrp interface advinterval
This command sets the advertisement value for a virtual router. The value for advinterval is time
used for VRRP advertisement in seconds. The parameter <vrID> is the virtual router ID which has
an integer value range from 1 to 255.
used for VRRP advertisement in seconds. The parameter <vrID> is the virtual router ID which has
an integer value range from 1 to 255.
Default
1
Format
config router vrrp interface advinterval <slot.port>
<vrID> <seconds>
config router vrrp interface authdetails
This command sets the authorization details value for the virtual router configured on a specified
interface. The parameter <none|simple> specifies the authorization type for virtual router
configured on the specified interface. The parameter [key] is optional, it is only required when
authorization type is simple text password. The parameter <vrID> is the virtual router ID which
has an integer value ranges from 1 to 255.
interface. The parameter <none|simple> specifies the authorization type for virtual router
configured on the specified interface. The parameter [key] is optional, it is only required when
authorization type is simple text password. The parameter <vrID> is the virtual router ID which
has an integer value ranges from 1 to 255.
Default
The default value for authorization type is No authorization.
Format
config router vrrp interface authdetails <slot.port>
<vrID> <none|simple> [key]