Netgear gsm7312 Manuale Utente
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Routing Commands
8-35
202-10009-01
The default value is disable.
Format
config bootpdhcprelay adminmode <enable/disable>
config router bootpdhcprelay maxhopcount
This command configures the maximum allowable relay agent hops for BootP/DHCP Relay on the
system. The <hops> parameter has a range of 1 to 16.
system. The <hops> parameter has a range of 1 to 16.
Default
4
Format
config bootpdhcprelay maxhopcount <1-16>
config router bootpdhcprelay minwaittime
This command configures the minimum wait time in seconds for BootP/DHCP Relay on the
system. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the
seconds-since-client-began-booting field of the request as a factor in deciding whether to relay the
request or not. The parameter has a range of 0 to 100 seconds.
system. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the
seconds-since-client-began-booting field of the request as a factor in deciding whether to relay the
request or not. The parameter has a range of 0 to 100 seconds.
Default
0
Format
config bootpdhcprelay minwaittime <0-100>
config router bootpdhcprelay serverip
This command configures the server IP Address for BootP/DHCP Relay on the system. The
<ipaddr> parameter is an IP address in a 4-digit dotted decimal format.
<ipaddr> parameter is an IP address in a 4-digit dotted decimal format.
Default
0.0.0.0
Format
config bootpdhcprelay serverip <ipaddr>