Netgear gsm7312 Manuale Utente
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
8-34
Routing Commands
202-10009-01
config router vrrp removedetails
This command removes all VRRP configuration details of the virtual router configured on a
specific interface. The parameter <vrID> is the virtual router ID which has an integer value ranges
from 1 to 255.
specific interface. The parameter <vrID> is the virtual router ID which has an integer value ranges
from 1 to 255.
Format
config router vrrp removedetails <slot.port> <vrID>
BootP and DHCP Relay Commands
show router bootpdhcprelay
This command displays the BootP/DHCP Relay information.
Format
show router bootpdhcprelay
Maximum Hop Count
The maximum allowable relay agent hops.
Minimum Wait Time
(Seconds)
The minimum wait time.
Admin Mode
Represents whether relaying of requests is enabled or disabled.
Server IP Address
The IP Address for the BootP/DHCP Relay server.
Circuit Id Option Mode
The DHCP circuit Id option which may be enabled or disabled.
Requests Received
The number or requests received.
Requests Relayed
The number of requests relayed.
Packets Discarded
The number of packets discarded.
config router bootpdhcprelay circuitidoptionmode
This command enables or disables the circuit ID option mode for BootP/DHCP Relay on the
system. The <mode> parameter has possible values of enable and disable.
system. The <mode> parameter has possible values of enable and disable.
Default
disable
Format
config bootpdhcprelay circuitidoptionmode
<enable|disable>
config router bootpdhcprelay adminmode
This command enables or disables the forwarding of relay requests for BootP/DHCP Relay on the
system. The <mode> parameter has possible values of enable and disable.
system. The <mode> parameter has possible values of enable and disable.