Garmin 530 Guida Utente

68

68

5 - procedures

Starting where the previous example left 

off, we’ll assume weather conditions re sulted
in a missed approach at Lynchburg Regional. 
Now, you’ve decided to divert to Farmville 
Regional (KFVX) instead.

1. Press direct-to.

2. Use the small and large right knobs

to enter the destination airport’s identi-
fi er (KFVX).

3. Press ENT twice.

This time, you select the GPS runway 21 

approach into Farmville Regional. The GPS 
runway 21 approach begins with a holding 
pattern at the IAF, BODRY in tersection.

4. Press PROC and select the “GPS 21” 

approach. (See page 61 for additional instructions.)

5.  From the transitions window, select BODRY intersection as the IAF. Also, select “Activate?” to load and activate 

the approach.

6.  Once you activate the approach, the Active Flight Plan Page appears. You may review the approach sequence 

by pressing the small right knob and rotating the large right knob. Press FPL to return to the navigation 
pages.

7.  As in the last example, within 30 nautical miles of the airport, the GNS 530 switches from enroute mode to 

terminal mode, and the CDI scale transitions from 5.0 to 1.0 nautical miles, full scale defl ection.

NOTE: Upon activating an RNAV GPS approach, you are given the option to skip any non-required 
holding patterns during the initial transitions of the approach.

 

 

 

 

 

          {continued}

GPS Rwy 21

nop
qrs

)

61-112.indd   68

4/11/2003, 8:52:19 AM