Clavia c1 Guida Utente
Nord C1 Combo Organ
The Effect Section
OS V1.0X
13
The Effect Section
The effect section consists of 7 models, routed as illustrat-
ed below.
ed below.
The Overdrive, Amp and Rotary Speaker models are used one at
a time, depending on the
a time, depending on the
SPEAKER
button setting.
If present, the
ON
button activates/deactivates the effect.
Note: all knobs and buttons will always be active and
change state though the effect needs to be activated in or-
der for the change to be audible.
change state though the effect needs to be activated in or-
der for the change to be audible.
DELAY
A vintage-sounding delay featuring
echoes/repeats with adjustable tempo
and feedback settings.
echoes/repeats with adjustable tempo
and feedback settings.
The
TEMPO
knob controls the delay
time.
The
AMOUNT
knob adjusts the balance
between the dry signal and the delayed
repeats.
repeats.
The
FEEDBACK
button selects number of
repeats, starting with 1 repeat (no LEDs
lit) to many (both LEDs lit).
lit) to many (both LEDs lit).
By activating the
UPPER
function (
SHIFT
+
FEEDBACK
), the delay effect is limited to
the upper manual.
The
TAP TEMPO
button allows you to set the delay time by
tapping the button repeatedly.
DRIVE
The
DRIVE
knob controls the amount of
gain applied to the Overdrive, Amp or
Rotary Speaker effects respectively, de-
pending on the
Rotary Speaker effects respectively, de-
pending on the
SPEAKER
effect setting.
EQ
A 3-band EQ featuring controls for bass,
midrange and treble, with ± 15dB cut/
boost for each band.
midrange and treble, with ± 15dB cut/
boost for each band.
As the
TREBLE
knob operates in the same
frequency area as the click sound, it also
functions as a click level control.
functions as a click level control.
SPEAKER
There are three different amp simula-
tions available, including rotary speaker
simulation, selectable with the
tions available, including rotary speaker
simulation, selectable with the
MODE
button. The
DRIVE
knob controls the
amount of gain applied to the selected
model, or if no model is activated to the overdrive effect.
model, or if no model is activated to the overdrive effect.
•
ROTARY SPEAKER
model of a L-type rotary speaker cabi-
net.
•
AMP 1
model of a F-type Twin.
•
AMP 2
model of a R-type Jazz Combo.
• When no LED is lit the effect is bypassed.
When using an external cabinet connected via the high
level outputs the
level outputs the
ROTARY SPEAKER
’s LED will flash repeated-
ly if activated to indicate that the internal rotary speaker
simulation is bypassed. Please note that this is dependant
on the external cabinet circuitry, and if the LED do not flash
but lit constantly you will experience a double rotary
speaker effect.
simulation is bypassed. Please note that this is dependant
on the external cabinet circuitry, and if the LED do not flash
but lit constantly you will experience a double rotary
speaker effect.
Tonewheel / Transistor Organ
Delay
Overdrive
EQ
Amp
Unison
Reverb
Rotary Speaker